Creality Space π Filament Dryer

The filament is dried by the Creality Space Pi Filament Dry Box while printing, preventing moisture absorption from outside environmental influences. This guarantees superior quality and avoids stringing, clogging, inadequate adhesion, or layer shifting.

Double 360° hot air heater with PTC heating technology

For even heating, the dry box is equipped with a fan that circulates the hot air at a 360° angle to effectively dry damp filaments. The system is supported by a long-lasting and energy-saving 110-watt PTC heating element.

LCD touch screen

The Creality Space Pi Filament Dry Box is equipped with a user-friendly and easy-to-use 3.7-inch touchscreen for monitoring drying conditions. The drying countdown, the real-time temperature and the real-time humidity can be tracked on the display.

One-key set for 12 filament types with 48 hour timer function

The filament dry box has 12 different temperature settings for different filament types. The temperature can be freely adjusted between 45 °C and 70 °C. The heating duration can also be freely adjusted from 0 to 48 hours.

Power-off memory function

In the event of an unforeseen power outage, the device can be easily restarted as it remembers the previous material and temperature settings.

Other features

⋅ Compatible with 1.75mm and 2.85mm filaments
⋅ Supports high-speed 3D printers and filaments from the Hyper series (recommended)
⋅ Easy switching between °C and °F
⋅ Safety through power switch
⋅ Moisture-proof silicone plug
⋅ Input voltage of 220V 50/60Hz, rated power of 145W

► Suitable for spools with a diameter of 20 cm and a width of 7.9 cm